Hi-Tech Extruder Screws -- For Extruders of any Manufacturer
- ALL SCREWS DESIGNED BY DR. CHRIS RAUWENDAAL--the preeminent screw designer in the U.S.
- SPIRAL MADDOCK SECTION performs same function as barrier screw, at a fraction of the cost.
- PREVENTS PASSAGE OF UNMELT, just as barrier screw does.
- NOT SUBJECT TO BLOCKAGE, as barrier screw is.
- CONFINING BARRIER TO SHORT SECTION allows greater pumping capacity than barrier screw.
- PROVIDES DISPERSIVE MIXING, just as barrier screw does.
- SAXTON MIXER AT TIP provides distributive mixing -- eliminates temperature gradients in melt stream.
A TECHNOLOGICAL BREAKTHROUGH -- THE CRD MIXER!!
- MIXING PERFORMANCE OF TWIN SCREW in a single screw extruder.
- ALLOWS TWIN SCREW PERFORMANCE at a fraction of the cost of a twin screw extruder system.
- DEVELOPED BY Dr. Chris Rauwendaal (Patent Applied For)
- USED IN HARREL MIXTRUDER to give twin screw performance at single screw prices.
- FOR FULL DETAILS FILL OUT inquiry
form or call Harrel at (203) 866-2573
PRICES
| SIZE |
GENERAL PURPOSE |
SAXTON MIXER ONLY |
PLUS SPIRAL MADDOCK |
| 3/4" |
SC-107 -- $2375 |
SC-207 -- $2525 |
SC-307 -- $2875 |
>
| 1" |
SC-110 -- $2525 |
SC-210 -- $2875 |
SC-310 -- $3375 |
| 1 1/4" |
SC-112 -- $2695 |
SC-212 -- $3025 |
SC-312 -- $3495 |
| 1 1/2" |
SC-115 -- $2795 |
SC-215 -- $3195 |
SC-315 -- $3695 |
| 2" |
SC-120 -- $3025 |
SC-220 -- $3425 |
SC-320 -- $4325 |
| 2 1/2" |
SC-125 -- $3195 |
SC-225 -- $4325 |
SC-325 -- $4775 |
| 3 1/2" |
SC-135 -- $4975 |
SC-235 -- $5425 |
SC-335 -- $6725 |
| 4 1/2" |
SC-145 -- $7175 |
SC-245 -- $7945 |
SC-345 -- $8925 |
Prices subject to change without notice.
ORDER SCREWS FOR EXTRUDERS OF ANY MANUFACTURER ON LINE
To order a screw, fill in the form below and click "submit". Harrel will enter your order
and send you an Email or FAX acknowledgement stating Engineering data
and credit information required, if any.
Back to Harrel Home Page